SILENT 60 Series

Category:

Description

GENERAL INFORMATION

The following technical specifications (“Specifications”) describe the technical construction elements of the SILENT 60 in detail. 

All components are marine grade and have a CE certificate. The SILENT 60 has been designed and built in accordance with the ISO rules and in compliance with the safety standards according to the 94/25/CE directive.

MAIN TECHNICAL CHARACTERISTICS

Dimensions and Capacities

Design & naval engineering  Dr. Albert Nazarov
Concept and innovation  Mag. Michael Köhler
Length overall  17,99 m  59,0 ft
Length of waterline  17,80 m  58,4 ft
Beam overall  8,99 m  29,5 ft
Draft  0,93 m 3,0 ft
Slenderness ratio (Lwl/Bwl)  10,08
Light displacement *)  34 t  75,000 lbs
Water *)  2 x 500 L  2x 132 gal (US)
Waste-water *)  2 x 500 L  2 x 132 gal (US)
Fuel *)  2 x 500 L  2 x 132 gal (US)
Standard motors (electric)  2 x 50 kW
CE certification  A: 12; B: 12; C: 16; D: 20

*) Light displacement and performance predictions subject to change due to specification of vessel.

Engines and Performance

  • a) 2 x 50 kW high efficiency motors
  • b) Cruising speed 6-7 knots, top speed approx. 10 knots
  • c) High-efficiency bronze propellers on shafts
  • d) Engine controls and control panels at inside and outside helm e) Access to engine- / technical-compartments via cockpit hatch f) Engine-compartments ventilation: natural aeration and forced extraction g) Generator-, engine- and technical compartments sound protected h) Equipment includes:
    – Filtration: pre-filter, water-separator and filter
    – Fuel cut-out remote control
    – Fuel filler, aeration
    – Gauges for fuel level on chart table

Tests before Delivery

Before the delivery the manufacturer will carry out the following test:

  • a) Preliminary test of electrical system
  • b) Preliminary test of hydraulic system
  • c) Preliminary test of propulsion system
  • d) Test for maneuvering
  • e) Test of speed at different rpm
  • f) Test and commissioning of electronic systems
  • g) Control and check of the correct installation and operation of all components h) All surveys required for CE must be passed successfully

Construction characteristics

  • a) Lightweight glass sandwich composite construction
  • b) Resin infusion for strong and lightweight structure
  • c) High quality and osmosis free vinyl ester resin
  • d) Sophisticated torsion resistant hull and bulkhead structure
  • e) Watertight bulkheads, sealed floor-sections and collision-compartments for ultimate safety
  • f) Foam sandwich structure of boat acts as thermal and sound insulation g) Additional thermal insulation of the hull and the superstructure h) Complete boat in gelcoat surface

EXTERNAL LAYOUT STANDARD AND FITTINGS

Transoms

  • i) Shower (H/C) in starboard transom
  • j) Inox handrails
  • k) 1x swimming ladder at transom step
  • l) Bench at the salon-wall with cockpit table
  • m) Stairs to flybridge
    gelcoat surface

Engine- / Technical Compartments

  • a) Access through liftable stairways
  • b) Space for generator and other technical components on port side
  • c) Space for bike, water toys etc. in the starboard stern compartment
  • d) Sound-protection
  • e) LED-light in each technical compartment

Foredeck

  • a) 2 x deck-hatches for access to forward storage-compartments
  • b) 1.500W electric windlass (10 mm chain)
  • c) Large flush front deck
  • d) Large hatches give access to storages for fenders, ropes, deckchairs
  • e) Dedicated storage for the (optional) kite

Flybridge

  • a) Helm console for engine controls and navigation equipment
  • b) L-shaped sofa with table,
  • c) 2 sunbeds
  • d) storage underneath sofas
  • e) Helm bench with flipable backrest
  • f) Rigid solar-roof (optionally retractable)

Deck fittings

  • a) 11 x mooring cleats
  • b) 630 – 900mm inox stanchions with inox handrail
  • c) Pulpit in stainless steel, optional bow seats with teak

Exterior decoration

  • SILENT-YACHTS logo on sides of coach roof, model name on each hull.

Exterior decoration

  • SILENT-YACHTS logo on sides of coach roof, model name on each hull.

INTERIOR DECORATION AND FITTINGS

Layout Versions

Standard Version – Master Cabin in front of salon

  • a) 4 CABIN VERSION: 1 full-width (20m²) Master-cabin in front of the salon, 1 VIP-cabin, 2 generous guest cabins, with 1 double bed or 2 single beds each, all cabins with en-suite bathroomGrand Salon – Front Exit Version: (optional)
  • a) 4 CABIN VERSION: 1 Master cabin with separate living room, 1 VIP cabin, 2 guest cabins with 1 double bed or 2 single beds each, all cabins with en suite bathroom
  • b) 4 + 1 CABIN VERSION: 1 Master cabin with separate living room, 1 VIP cabin, 2 guest cabins with 1 double bed or 2 single beds, 1 crew cabin with separate entrance from the deck, all cabins with en-suite bathroom (optional)
  • c) 5 CABIN VERSION: 1 Master cabin, 3 guest cabins with 1 double bed each, 1 guest cabin with 2 single- or 2 bunk beds, all cabins with en-suite bathroom (optional)
  • d) 5 + 1 CABIN VERSION: 1 Master cabin, 3 guest cabins with 1 double bed each, 1 guest cabin with 2 single- or 2 bunk beds, 1 crew cabin with separate entrance from the deck, all cabins with en-suite bathroom. (optional)

All cabins with en-suite bathrooms.
All bathrooms incl. sink, electric toilet and shower.
Some cabins are available with double beds or two single beds or bunk beds. Customized versions on request.

Electricity

  • e) Fuses and interrupters for 12 and 24V DC and 230V AC
    (US configuration 110V optional)
  • f) All wiring with tin-coated copper cables of marine grade
  • g) All cables labeled and numbered and mounted on rails
  • h) All lights high quality LED
  • i) Main switchboard for battery level, fuel-, water- and blackwater-levels, navigation lights
  • j) Shore-power connection with fuse

General Interior

  • a) Headroom in the cabins, bathrooms and corridors 2,10m (6,9´)
  • b) Headroom in the salon: 2,20m (7,3´)
  • c) Large portlights in all cabins
  • d) Natural aeration and forced aspiration-system in all cabins / bathrooms
  • e) Furniture built in plywood or composite wood with ALPI real wood veneer
  • f) Thermal insulation for excellent room climate
  • g) All walls in plywood or composite materials, lacquered, ALPI real wood veneered or covered with technical leather
  • h) All ceilings covered with technical leather
  • i) Hand rails in stainless steel, optionally covered with leather
  • j) All cabin- and bathroom doors in light weight material, high quality, soft closure
  • k) Door-locks with high quality “anti-rattle” mechanism, all drawers soft closure
  • l) Port lights and deck hatches in “flush deck” design and CE approved
  • m) All steps with anti skid surface, LED courtesy-lights

Salon

  • a) Vast panoramic salon of ~ 48m² 
  • b) Sliding salon door and sliding window 
  • c) Sliding window on the port side, fixed window on stb side 
  • d) Dimmable LED spotlights on the ceiling

Inside Helm-Position

  • a) Helm-position with steering, engine-controls and -displays, compass
  • b) Large helm console for electronic equipment
  • c) 2 x 230V (US 110V) socket, 2 x 12V, 2 x USB sockets
  • d) Helms-seat for two persons (~120cm wide)
  • e) 360° view from the helm-position
  • f) Vast storage underneath with long drawers

Salon Lounge Area

  • a) L-shaped sofa with comfortable cushions, could serve as bed 
  • b) Dining table

Galley

  • a) U-shaped kitchen with acrylic stone worktop 
  • b) Sink in stainless steel 
  • c) 230V sockets on the worktop 3x 2 sockets 
  • d) Induction cook-top (4 plates) 
  • e) Oven with grill and microwave 
  • f) Fridge or side-by-side fridge / freezer (depending on version) 
  • g) Several lockers and drawers (soft closure)

Front Exit Version

  • a) Front exit to front cockpit with weathertight front door 
  • b) L-shaped sofa with foldable table 
  • c) Two lounge seats with cushions and cup holders 
  • d) Steps up to the front deck 
  • e) Grating at the front door with drainage system underneath

General Cabins

  • a) 1 large double bed or 2 single beds with slatted base and comfortably upholstered headboard
  • b) Maritime mattresses in PU-foam with varied densities for greater comfort and restful sleep (140mm thick)
  • c) King size beds in all cabins – 180 to 200 cm wide
  • d) Storage under the bed, accessible from the side or from the top e) Hanging lockers and lockers with shelves, storage boards (depending on version)
  • f) 2x 230V sockets, 2x USB socket
  • g) LED-ceiling-lights (dimmable) and reading lights back side of the bed

Front Master-Cabin – Additionally to the above-mentioned features

  • a) Full-width cabin
  • b) 1 large double bed 200cm x 180cm with side access with slatted base
  • c) Vast storage area on the bridge deck alongside the bulkhead
  • d) Bathroom on portside with upholstered seat, large shower and 230V (US 110V) plugs

Bathrooms

  • a) Sink / basin with mixer tap (H/C), electric toilet
  • b) Locker under / above the sink / basin, mirror above the basin
  • c) Accessories like towel holder, soap-dispenser, paper-holder
  • d) Separate shower (H/C) in each bathroom, non-skid flooring
  • e) Storage-shelf and seat in shower
  • f) 2 x 230V socket and LED spotlights

Bathroom of Master- and VIP Cabin

Additionally, to the above-mentioned features:

  • a) Generous bathroom with large shower
  • b) Additional mirror and lockers

Energy production and storage

  • a) 42 high-efficiency solar-panels with >16 kWp in total
  • b) MPPT solar charge regulators
  • c) Lithium batteries 143 kWh
  • d) 24V service batteries with 30A charger, 80A for 48V batteries
  • e) Inverter 16 kVA – sufficient for all standard household appliances
  • f) Charge-, consumption- and capacity controls for all electric circuits

Steering system

  • a) 2x rudder blades with stainless steel rudder shaft
  • b) GRP tube for rudder bearings
  • c) Electro – Hydraulic steering system with FU

Fresh water, bilge and sewage system

  • a) All hoses and pipes are marine grade
  • b) Fresh water:
    – 2 x 500L fresh water tank
    – Gauges for water level on chart table
    – Fresh water circuit including pressure pumps
    – Electric boilers for showers / sinks
    – 1x hand shower on stern platform (H/C)
  • c) Waste water:
    – 2x waste water tank with electric pump, gauges on chart table
    – Waste water deck suction
  • d) Drainage circuit:
    – Self-draining cockpit as per CE standards
    – Automatically activated electric bilge pump & manual pump in every watertight compartment

Safety and redundancy

  • a) Watertight bilges
  • b) Hermetically closed crash compartment at the bow bottom
  • c) Oversized electric bilge pumps + additional manual bilge pumps for double safety, all vital systems are redundant

YACHT BROKER