SILENT VisionF 82

Thermal and Acoustic Insulation

• The insulation system has the purpose to ensure maximum comfort on board and to increase the efficiency of heating and cooling systems

Accommodation

• All cabins will be thermally insulated in the internal sides of the walls and ceilings.

Engine room

• 1. All components of the exhaust system (hose, water lock, gas-water-separator and muffler) will be supported by visco-elastic elements/rubber supports, the generator with a double layer of rubber supports with a noise reducing enclosure.
• 2. All components of the cooling system of air conditioning, water maker, hydraulic pumps, diesel motors, inverters, and all others will be supported by visco-elastic elements / rubber supports, in particular all cooling pumps hoses and fans will be mounted in a way that they do not create vibrations to the hull.
• 3. Extraction and ventilation ducts covered with noise insulating materials.
• 4. Yacht sides, ceilings and bulkheads will be covered with thermal insulation.
• 5. 10 kg FM200 automatic fire extinguisher in each engine room.
• 6. 6 kg dry powder manual fire extinguisher in each engine room.

General

• 1. All deck hinges with hidden bolts, heavy duty, polished stainless steel
• 2. All hatches lockable, larger ones equipped with gas pistons
• 3. Stainless steel handrail all around the deck, horizontal pipe minimum 40 mm, vertical stanchions minimum 30 mm
• 4. Fixed windows in laminated glass, curved in one direction, tinted, heat reflecting with a slight mirror effect
• 5. Synthetic teak deck

Fly Bridge

• 1. Flybridge helm console
• 2. 2 x ergonomic helm seat /or 1 x helm bench with synthetic leather coverings
• 3. Flybridge stairs with stainless steel handrail and teak steps
• 4. 1 x glass hatch on flybridge stairwell
• 5. Sofa with 1 x coffee table and 2 x chairs
• 6. Rigid sunroof over the flybridge with solar panel array on top
• 7. 1 x mast with standard navigational equipment, antennas, and lights
• 8. Stainless steel flag pole on flybridge aft
• 9. Wood ceiling panels with easy clean fabric coverings
• 10. LED ceiling lights

Fore Deck

• 1. 2 x forepeak / storage, access hatch (100cm x 100cm), LED light + switch, stainless steel ladder, 1000 mm long stainless-steel bar of 25 mm diameter to fasten fenders and ropes
• 2. Weathertight deck hatches to chain locker and storage compartments
• 3. 14 x retractable hooks on front deck
• 4. Access to the anchor chain to connect the bridle, chain guide and anchor
• 5. 2 x strong pad eyes or rings on the inner side of the bow for a bridle
• 6. 2 x capstans @ 2.000 W

Aft Deck and Transom

• 1. 1 x relax sofa with backrest on starboard side
• 2. 1 x sofa with backrest at the transom, storage inside
• 3. 1 x fixed teak table for 8 persons with stainless steel legs (teak or Dekton top) 4. 6 x dining chairs + 2 foldable chairs
• 5. 2 x aluminium roof support poles
• 6. 2 x capstans @ 2.000 W and 2 x roller fairleads
• 7. 1 x sliding salon door / window, stainless steel and lockable
• 8. LED lights in ceilings + low level mood light, all dimmable
• 9. 2 x waterproof sockets 230 V (US 110 V option) + 2 x USB sockets near to relax sofa
• 10. 1 x locker for shore water connection in aft area of the yacht
• 11. 1 x shower head with hot/cold water on aft deck (port side)
• 12. 1 x pair of manual swimming ladder connection points (port side)
• 13. 1 x removable stainless steel swimming ladder with teak steps, foldable 14. Hydraulic Passarella/gangway (port side)
• 15. Storage and utility cabinet under the stairs to flybridge

Windows and Port Lights

• 1. All deck hatches are flush type, teak finish
• 2. All glass in hull and superstructure are of same appearance, slight mirror effect, heat reflecting
• 3. Stern sliding door stainless steel frame, heavy duty, manual opening
• 4. Large glass portholes in all cabins
• 5. Honeycomb shades and blinds in all cabins, galley, and salon

General specifications

• 1. Headroom in the lower deck 202 cm high,
• 2. Headroom in the salon / pantry: 215 cm / 245 cm
• 3. Width of door openings minimum 60cm (final opening inside of the installed doorframe)
• 4. Air extractor in all bathrooms
• 5. Interior furniture built in lightweight materials, light plywood
• 6. All walls lacquered or covered with easy clean fabric materials
• 7. Standard interior with mix of modern veneer with matt lacquered surfaces
• 8. Wood finish can be selected by the customer amongst the samples at the shipyard showroom. Lacquered surfaces are available in any colour with matt or gloss finish
• 9. Handrails in stainless steel, covered with leather or metal paint at staircases
• 10. All cabin and bathroom doors in light weight material, high quality, soft closure
• 11. Door handles can be selected by the customer from a selection at the shipyard showroom
• 12. All mirrors are in clear glass
• 13. Gerflor floorings, in salon and cabins covered with decorative carpets 14. Electric marine toilets

Salon

• 1. 1 x fixed dining table for 8-10 persons, 3 x dining chairs
• 2. 1 x straight dining sofa
• 3. 1 x U shaped lounge sofa with storage underneath
• 4. 2 x cabinets, with two drawers, one opening lid per cabinet, including removable bottle and glass holders, on port side
• 5. 2 x cabinets starboard side with long drawers.
• 6. Salon helm station:
  • 1 x ergonomic helm seat with synthetic leather coverings
  • Control dashboard and central panels in wood, glass and carbon • Ceiling LED spotlights, 1 x red night light
  • 2 x 230VAC sockets, 2 x USB sockets, 2 x 12V sockets, light switches,

Galley

Galley is built with characteristics as below:

• 1. All household appliances are Siemens or similar
• 2. 1 x side by side fridge / freezer with ice maker
• 3. 1 x induction cooktop with glass downdraft ventilation
• 4. 1 x oven / steam or grill / microwave combination
• 5. 1 x dishwasher under worktop in galley
• 6. 1 x water purifier / filter unit
• 7. 1 x washing machine with dryer
• 8. High pressure ceramic solid worktop (Dekton)
• 9. 1 x stainless steel sink and tap (HansGrohe)
• 10. LED ceiling spotlights
• 11. Light switches, 8 x power sockets and 2 x USB sockets

Master Cabin

• 1. Access from salon via stairway
• 2. 1 x king size bed with 4 base drawers and upholstered or mirror headboard, with high quality mattress (180 x 200 cm) and Froli system
• 3. 2 x leather cladded sideboards with 2 drawers
• 4. Cabinets with drawers and doors according to layout
• 5. Wardrobe with full height hanging space
• 6. Wood ceiling and wall panels with easy clean fabric coverings
• 7. 1 x reading light, on each side of the bed
• 8. LED ceiling spotlights, indirect mood lights on the ceiling, inside the cabinets and under the bed frame
• 9. 6 x light switches, 3 x 230V sockets, and 2 x USB sockets
• 10. Hidden lockers where possible, depending on layout

Master Bathroom

• 1. 1 x electric marine toilet, air extraction with switch inside the bathroom
• 2. 1 x shower cabin separated from the bathroom
• 3. Glass door, s/s hinges, walls in FRP, tiles or artificial stone, non-slip flooring in shower
• 4. 1 x window curtain suitable for bathroom
• 5. LED ceiling spotlights
• 6. 2 x power sockets and light switches
• 7. 1 x mirror and mirror light
• 8. Taps / shower rose / rain shower head
  • 1 x shower mixer tap
  • 1 x adjustable height handheld shower head and a rain shower
  • 1 x wash basin mixer tap
• 9. Bathroom accessories:
  • 2 x shower soap basket, 1 x waste bin 3lt
  • 2 x towel rails, 2 x bathrobe hooks
  • 1 x toilet brush holder, 1 x toilet paper holder

Guest Cabins

• 1. Access from salon via internal stairway
• 2. King size bed (180 x 200 cm) or 2 x twin size bed (95 x 200 cm)
• 3. Small storages on the headboard in wood with easy clean fabric coverings
• 4. Cabinets with drawers and doors according to layout
• 5. Wood ceiling and wall panels with easy clean fabric coverings
• 6. 1 x reading light on each side of the bed
• 7. LED ceiling spotlights, indirect mood lights on the ceiling, inside cabinets and under the bed frame
• 8. 6 x light switches, 3 x 230V sockets, and 2 x USB sockets
• 9. Hidden lockers where possible, depending on layout

Guest Bathrooms

• 1. Furniture with acrylic solid top
• 2. 1 x Dekton recessed washbasin (high pressure ceramic)
• 3. 1 x electric marine toilet, air extraction with switch inside the bathroom
• 4. 1 x shower cabin, with full width glass wall and glass door
• 5. 1 x window curtain suitable for bathroom
• 6. LED ceiling spotlights
• 7. 2 x 230V power sockets and light switches
• 8. 1 x mirror and mirror light
• 9. Taps / shower rose / rain shower head
  • 1 x shower mixer tap
  • 1 x adjustable height handheld shower head and a rain shower
  • 1 x wash basin mixer tap
• 10. Bathroom accessories:
  • 2 x shower soap dispenser, 1 x waste bin 3lt
  • 2 x towel rails, 2 x bathrobe hooks
  1 x toilet brush holder, 1 x toilet paper holder

Upholstery, blinds, and fabrics

• All the sofas, chairs, armchairs, and bed heads can be selected by the customer amongst the standard decor and material samples presented at the shipyard showroom.
• Marine fabrics will be used in all outdoor furniture and selected by the customer amongst the standard decor and material samples presented at the shipyard showroom.
• All leather, artificial leather or fabric parts are with double stitch at all edges and corners.

Bathroom Fitting and Accessories

• 1. Taps and shower kit are provided and installed in matt or chrome finishing
• 2. Sinks are recessed in Dekton countertop
• 3. High pressured ceramic solid surface (Dekton)

Lights

• 1. All lighting throughout the yacht are in the light colour of 2.700 – 3.000 K.
• 2. Dimmers will be installed throughout the yacht on all lights where possible.
• 3. Interior ceiling lights and reading lights as required throughout the yacht
• 4. Interior courtesy lights will be installed under sofas, in galley, under the bed frames.
• 5. Exterior courtesy lights will be installed on fly bridge, at side decks and underneath stairs to stern swim platforms.
• 6. Exterior ceiling lights will be installed at flybridge, front and aft deck ceilings and around super structure
• 7. Underwater LED lights (6 pieces).
• 8. Generator and machinery compartment lights will be LED (rated to IP65)
• 9. All navigation lights will be installed as per COLREG’s requirement
• 10. Search light on the antenna mast

Air Conditioning System

• Mediterranean air conditioning system 100.000 BTU, high efficiency seawater cooled chilled water system, super silent, inverter technology, air handlers in each cabin and in the salon, each cabin/air handler separately adjustable.

Electric System 230 VAC

• 1. All kitchen appliances
• 2. AC main distribution box
• 3. 2 x 50A shore power cable connection sockets, MARINCO, IP 65 4. 4-6 Grounding plates for AC and DC systems

Electric System DC

• 1. Main DC distribution panel
• 2. Fuse panels for all electrical loads
• 3. Light switches and USB sockets throughout the yacht
• 4. 1 x 12V/80Ah radio battery with battery charger
• 5. Battery isolator switches for start batteries
• 6. Marine waterproof switches will be used at both helm stations (rated to IP65)
• 7. Bilge pumps complete with bilge alarms
• 8. Discharge pump for black water tanks
• 9. Tank sensors and level alarms
• 10. 1 x anchor windlass on fore deck
• 11. 4 x vertical windlass with footswitches (veer and haul)
• 12. 4-6 Grounding plates for AC and DC systems

Energy Production

• 1. 34 x high-efficiency SunPower Maxeon 3 / 400-watt solar panels
• 2. MPPT solar charge regulators and fuses
• 3. Energy level display for solar panels and batteries
• 4. Generation at up to 2×200 kW with main propulsion engines

Electrical Power Storage

• 1. 156 kWh battery energy storage
• 2. Generator start battery, as per manufacturer’s recommendation
• 3. Main engine start battery, as per manufacturer’s recommendation
• 4. Battery boxes for all batteries will be fully insulated with fireproof material

Battery Management System

• Each battery module comes with an integrated battery management system (BMS). This  is an intelligent electronic module that measures all cell voltages and temperatures to  control balancing on both battery cell and module level. The battery modules  communicate by a galvanic isolated CAN-Bus system with the Master BMS, which  collects and monitors the status of all battery modules. If the measured values from a  battery module exceed the limit, the Master will automatically act to protect the  connected battery modules.  
• The high-resolution display on the BMS shows all important battery parameters at a  glance. The integrated Wi-Fi module will connect the display to the laptop on board and  makes it possible to check the systems remotely by technicians.

• 2 x 16″ monitors on main helm station and 2 x 16” monitors on flybridge helm station with world base map, 4G broadband radar, GPS log, EPIRB, 2 x depth sounder (1 x echosounder 1 x fishfinder), wind sensor, VHF radio with handset and speaker on each helm, AIS class B receiver, magnetic marine compass at each helm station, autopilot with 1 x control unit at each helm station. Digital control and monitoring system for all main systems and appliances.

Salon Helm Station

• 1. Ergonomic steering wheel
• 2. Electronic twin engine control throttles
• 3. Start/stop engine control switches
• 4. VHF Radio & Marine AIS
• 5. Anchor chain counter system and up/down controls
• 6. 2 x 16” chart plotter
• 7. Autopilot control unit
• 8. Magnetic marine compass
• 9. Navigation light switches
• 10. Horn control button
• 11. Bilge alarms and tank level indication on automation screen 12. Search light control

Flybridge Helm Station

• 1. Ergonomic steering wheel
• 2. Electronic twin engine control throttles
• 3. Start/stop engine control switches
• 4. VHF Radio
• 5. Anchor chain counter system and up/down controls
• 6. 2 x 16” chart plotter
• 7. Autopilot control unit
• 8. Magnetic marine compass
• 9. Horn control button
• 10. Search light control

Fresh Water System

• 1. Fresh water tank 2 x 2.210 litres, with manhole access
• 2. Potable water tank, filter system, small pump to supply galley and ice maker
  1 x water maker 150 litres/h
  1 x transom shower (hot/cold)
• 3. 2 x deck filler for water
• 4. Tank ventilation and filters
• 5. 2 x 55 litres/h water pump
• 6. 5 x water heater, 30 litres each
• 7. Shore water supply connection
• 8. 5 x hose connection points for fresh water (2 x bow, 2 x stern, 1 x flybridge)

Grey and Black Water System

• 1. 2 x 1.240 litres grey and black water tanks manhole with aluminium lid, level sensor
• 2. 2 x self-priming 24V pumps for manual tank discharge
• 3. Deck fitting wastewater for discharge to EN ISO standard
• 4. All sinks, showers, dishwasher and washing machine connected to black water tanks
• 5. All toilets connected to the black water tanks
• 6. Dishwasher and washing machine connected to 3-way valve
• 7. Wastewater hoses of marine grade, anti-odour type
• 8. Anti-odour filter on water tank’s vent

Bilge system

• 1. 1 x 400 litres dirty oil/bilge water tank
• 2. 12 x self-priming electric bilge pumps at lowest position in hulls
• 3. Bilge alarms will show an audible and a visual alert on the display screens 4. Manual bilge pump at stern area
• 5. Thru-Hull fittings with ball valves for overboard discharge
• 6. Bilge level monitoring at salon helm station

Fire-fighting & fire protection systems

• 1. Fixed firefighting / extinguishing system to all machinery compartments
• 2. Fuel shut-off remote control at helm and stern location
• 3. Portable fire extinguisher in each cabin and salon
• 4. Fire blanket in galley
• 5. 2 x fire detectors in each engine room

Fuel & oil systems

• 1. 2 x fuel deck filling points with splash-stop
• 2. Ventilation with odour-stop filter
• 3. 1 x day tank
• 4. Fuel manifold with valves
• 5. Fuel transfer pumps with filter
• 6. Diesel pre-filters, water separators
• 7. Alarm for water in the diesel filters on both helm stations
• 8. Double hose clamps stainless steel heavy duty as standard
• 9. Oil change system for main engines and generator
• 10. Tank level sensors, displayed at both helm stations

Mooring & anchor equipment

• 1. 1 x 24 V 3500 W electrical anchor winch, vertical type for chain with anchor stopper and 320 mm steel bollard, controlled at both helm stations with chain counter
• 2. 90 kg galvanized anchor with 110 m galvanized chain (14mm)
• 3. Chain wash system (saltwater)
• 4. 2 x capstans at stern (2000W, 24V) (port / starboard)
• 5. 2 x capstans at bow (2000W, 24V) (port / starboard)
• 6. 12 x retractable stainless steel cleats (4 x at bow, 2 x in the middle, 6 x at aft)

Others / miscellaneous

• 1. 1 x 4G/5G modem with 2 x SIM card slot
• 2. Wifi network over the boat
• 3. 4G/LTE wifi antenna